Pulse Control

Control Options

What is Pulse Control?

Pulse Control is a means of controlling lubrication based on machine cycles rather than a timer.  Our Pulse Control system tells our unit to lubricate only when a certain amount of activity has been reached by the intermittent operation of your application.

How does Pulse Control work?

ATS has developed an easy to use “Pulse Counter” (PC) for lubricating equipment that has intermittent operation. This control, which is customer programmed by selecting a DIP switch setting, activates the lubricator when a desired number of machine cycles has been reached, rather than by a time interval. Mounted near the machine, a motion sensor counts the pulses generated by a magnet, which is attached to a repetitively moving part of the machine, as it passes by the sensor. A signal is then sent to the circuit board, which maintains the pulse count and trigger the dispense cycle once the desired pulse count is achieved. A BLUE “LED” will flash every time the magnet passes the sensor. This indicates that the magnetic sensor is working. Example of standard settings: Switch #1, 25 pulse counts, switch #2, 50 pulse counts, switch #3, 100 pulse counts, etc. Custom factory programs are also available.

Is the Pulse Control system right for me?

ATS’ Pulse Control system was originally meant for Wind Lubrication.  It is similar to our Motion Control system.  They differ, in that the Pulse Control is meant for unschedulable intermittent function of machinery, while the Motion Control system is meant for machinery that runs for the work day, and shuts off overnight.

Pulse Control

Remote Control

Timer Control

Motion Control

Pulse Control

Our automatic lubricators can be used in conjunction with our pulse control system allowing you to efficiently lubricate only when machinery is in use.  Our pulse control system will turn off the luber when the‍‍‍ machinery is not moving.

ATS Electro-Lube is the originial manufacturer 
of automatic lubrication systems.  They feature the Electro-luber a 
single-point luber and also a wide range of motor driven lubers that 
dispense grease and oil in any environment.

Home > Accessories > Control Options > Pulse Control

The ATS 
Electro-Lube Ultimate Luber is a powerful motor-driven unit
 is a multi-point lubricator that can reach and maintain high pressures 
through long lines.  Our many accessories are great to use with the 
units.

CONNECT WITH US

7388 Wilson Avenue, Delta, B.C. V4G 1H3 Canada

‍‍‍ATS Electro-Lube produced the original Electro-Luber and has grown to world-wide recognition for their continued dedication to quality ‍‍‍a‍‍‍nd durability in all industries.

A world-leader in automatic lubrication solutions

© ‍‍‍‍‍‍‍‍‍2016 ATS Electro-Lube Int’l Inc.‍‍‍